Description

Sigineer 6000 Watt  48V to 110/220 volt inverter charger for sump pump. It is built for large inductive loads at home, it is capable of delivering 6000 watts with an exceptional 300% surge of 18,000 watts for 20 seconds, ideal for driving power hungry loads such as sump pump with a strong current draw and locked rotor amperage. It can start a sump pump of 3 horsepower size.

This 6KW inverter charger for sump pump features a big transformer to run a sump pump smoother.
The robust UI transformer with good isolation between DC and AC, it works with 88% peak efficiency and an idle consumption of 15 watts in power saver mode.
This 6000 watt inverter charger for sump pump is built with UPS function to give continuous power supply for big hp pumps during a power outage ; it can detect the loss of power and switch over to deep cycle battery backup system seamlessly to keep the loads powered on. The transfer switch is 80A.

The built-in 50A battery charger will charge the batteries promptly.
It is a very reliable pure sine wave inverter outputting clean AC power with a THD less than 10%.
For challenging startup demands, this 6KW power inverter for sump pump can start water pumps, motors and air compressors without overloading itself.
This is the most rugged 6000 watt  power inverter for sump on market.
For APC6048D models, the battery type selector position of “9” is customized with a special battery algorithm to work with Tesla Model S and Model X lithium-ion battery modules, that is
Low Battery Cut Off: 36Vdc
High Battery Voltage Alarm/ Charger Cut Off: 50.5Vdc
High Battery Cut Off: 51Vdc
If you are looking for a similar 6000 watt inverter charger with 24Vdc input, pls check out our 6000 Watt 24 Volt to 120/240 Vac Split Phase Inverter Charger

Currently, we offer a free remote LCD panel and BTS in the package.

 

FEATURES

• 6000 watt low frequency inverter
• 48Vdc input
• 120/240Vac Output
• 18000 watt surge for 20 seconds – 300% overload performance.
• AC/Battery Priority Selector
• Multi Stage Smart charger 65 Amp
• 10msec typical transfer time
• State-of -Art auto load sense with power saver
• Rich protective features
• Resettable low battery cut-off
• Extremely efficient stand by circuit with 15 watt idle
• No interference with equipments like TV, radio, etc.
• Capable of working with microwave ovens
• Exclusively designed AC- and DC – line filters for clean power output

 

SPECIFICATIONS

Inverter Output Specifications:
• Continuous Output Power: 6000 Watts
• Surge Rating: 18000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 230Vac
• Nominal Efficiency: 88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: <10%

Input Specifications:
• Nominal Input Voltage: 48.0Vdc
• Low Battery Alarm: 42.0Vdc-44.0Vdc
• Low battery Trip: 40.0Vdc-42.0Vdc
• High Voltage Alarm: 64.0Vdc
• Low battery Voltage Restart: 62.0Vdc
• Idle Consumption: 60 Watts
• Power Saver Mode Idle Consumption: 15 Watts

Charger Specifications:
• Output voltage: Depends on battery type selector setting
• Ac Input Voltage For Charger: Nominal 240Vac (164-243Vac+/-4%)
• Charger Rate: 50Amp
• Over Charge Protection Shutdown: 62.8V
• Input voltage range:140-270Vac
• Adjustable charge current: off-20%-100%
• Four Stage Smart Charger

Specifications Tailored for Tesla Battery Module At Battery Type Selector 9
• Low Battery Cut Off: 36/38Vdc
• Low Battery Voltage Alarm/ Charger Activation: 37/39Vdc
• Low Battery Cut Off Recovery: 47Vdc.
• Charger Cut Off: 48Vdc
• High Battery Voltage Alarm 50.5Vdc
• High Battery Cut Off: 51Vdc

Dimensions:
• Unit Weight: 70.4lbs/32KG
• Unit Size L x W x H: 23.5*8.5*7″ inches/598*222*180mm
• Shipping Weight: 74.8 lbs/34KG
• Shipping L x W x H:30.4 x 12.8 x 12.4 inches/760*320*310mm

 

Manual

6000 Watt 48 Volts DC to 110 220 Volts AC Low Frequency Inverter Charger – Pure Sine Wave Manual