This Remote Control Circuit Breaker works in 60V-290Vac 50/60Hz power systems. It works in virtually all power systems.
It works with Sigineer 120V or 240Vac inverter chargers.
It features overload, short circuit protection and remote on/off control via cables.
The two black and red cables allow the breaker to be opened when they are separated and closed when they get into contact.
The two cables accept control signal from Sigineer Power’s DC Detector, inverter dry contact or other third party devices. The breaker will cut off AC input to the inverter when battery is fully charged and accept AC input again when the battery voltage drops to preset level.
The two cables can also be controlled by external devices such as lithium battery BMS.
Note: The two remote cables don’t carry any voltage, don’t input any power, or damage will occur.
Constant green: breaker closed. / Flash green: breaker open.
For 120/230Vac single phase system, pls wire the hotline to “L” and the Neutral to “N”.
For 120/240Vac split phase system, pls pls wire the hotline1 to “L” and the hotline2 to “N”.
Contact us at email@example.com if you have further questions.