Most power inverters in market are ready made.
What if you need a special type or design of inverter? For example, privately labelled inverters ?
The answer is simple: work with an inverter manufacturer capable of designing a customer inverter for your electrical and commercial needs.
Unlike other Chinese companies which simply sell inverters with outmoded features, Sigineer Power design and manufacture our own products, and our strong engineering team has the capacity to create custom inverters in a short timeframe.
We can not only redesign our inverters electrically, but also make new exterior design for a custom inverter.
The inverter exterior design is critical concerning the installation environment. If you require a custom inverter to withstand hard hits and bumps, you’ll need heavy duty inner parts and exterior shell.
If you are looking a custom inverter with your own spec and exterior design, there is no problem too.
You name it, we can design it.
When installing inverters, there are often uncertainties about whether using a residual-current device or not.
An RCD works by detecting an imbalance in current in phase conductors to earth.
Without a RCD, you may expose yourself to electric shock.
Sigineer Power carries some RCD protected inverters from 1KW to 6KW.
There is a link between Earth terminal & Neutral terminal on the RCD INPUT side. This allows the RCD to sense the imbalance between L & N currents on the output side when the current to earth leakage occurs, for example, a human getting into contact with the Line.
These RCD inverters give you Residual current protection for your appliances.
Contact us at email@example.com to learn more.
• 3000 watt inverter charger
• 12Vdc input 230Volt true sine wave output
• 300% Unsurpassed surge capacity,12000 watt surge for 20 seconds
• Output voltage regulation to prevent a drop during a power surge
• AC/Battery Priority Selector
• Efficient, Power Factor Corrected, Multi Stage Smart Charger 80 Amp
• 10msec typical transfer time
• State-of -Art auto load sense with power saver
• Resettable low battery cut-off of 10V and 10.5V
• Extremely efficient stand by circuit with 18 watt idle
• No interference with equipments like TV, radio, etc.
• Capable of working with microwave ovens
• Exclusively designed AC- and DC – line filters for clean power output
• Built-in LCD Remote Controller Port.
Inverter Output Specifications:
• Continuous Output Power: 3000 Watts
• Surge Rating: 9000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 220/230Vac
• Nominal Efficiency: 88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: <10%
- Nominal Input Voltage: 12.0Vdc
- Minimum Start Batter Voltage: 9.0Vdc
- Low Battery Alarm: 10.5Vdc/11.0Vdc
- Low Battery Trip: 10.0Vdc/10.5Vdc
- High Voltage Alarm: 16.0Vdc
- Low Battery Voltage Restart: 15.5Vdc
- Low Battery Voltage Recover: 13.0Vdc
- Idle Consumption:8 watt
• Output voltage: Depends on battery type selector setting
• Charger Rate: 80Amp
• Over Charge Protection Shutdown: 15.7V
• Input voltage range:150-260Vac
• Adjustable charge current: off-20%-100%
• Four Stage Smart Charger
• Unit Weight: 49 lbs/22KG
• Unit Size L x W x H: 20*8.5*7″ inches/508*222*180mm
• Shipping Weight: 53 lbs/24KG
• Shipping L x W x H:27.6 x 12.8 x 12.4 inches/690*320*310mm
Custom Inverter Charger with RCD & New OEM Box Design 1KW to 6KW