This Pure Sine 4000 Watt Inverter Charger 12 Volt to 120/240Vac Split Phase outputs 120/240Vac, it has similar features like its 120Vac single phase counterpart, the
4000 Watt 12 Volt to 120Vac Pure Sine Inverter Charger.
The inverter accepts 12 volts DC input, which is great for vehicle upfitting, RV and boat applications with a 12 volt battery system.
The 4000 watt inverter charger consumes 45 watts in idle and 18 watts in power saver mode.
The marine-coated or conformal-coated printed circuit boards also make the 4000 watt inverter charger great for mobile or boat applications with protection from dust or water vapor in the air.
This 4KW inverter is labelled as “low frequency” by virtue of the rugged transformer working at a low frequency of 50Hz or 60Hz.
There is a DIP switch to control the output AC frequency between 50Hz and 60Hz.
This 4000 watt inverter charger produces a pure sine wave with a THD(total harmonic distortion) under 10%. It can smoothly run televisions, laser jet printers, CPAP machines and other medical equipments.
• 4000 watt inverter charger
• 12Vdc input 120/240Volt true sine wave output
• 300% Unsurpassed surge capacity,12000 watt surge for 20 seconds
• Output voltage regulation to prevent a drop during a power surge
• AC/Battery Priority Selector
• Efficient, Power Factor Corrected, Multi Stage Smart Charger 115 Amp
• 10msec typical transfer time
• State-of -Art auto load sense with power saver
• Resettable low battery cut-off of 10V and 10.5V
• Extremely efficient stand by circuit with 18 watt idle
• No interference with equipments like TV, radio, etc.
• Capable of working with microwave ovens
• Exclusively designed AC- and DC – line filters for clean power output
• Built-in LCD Remote Controller Port.
Inverter Output Specifications:
• Continuous Output Power: 4000 Watts
• Surge Rating: 12000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 120/240Vac
• Nominal Efficiency: 88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: <10%
- Nominal Input Voltage: 12.0Vdc
- Minimum Start Batter Voltage: 9.0Vdc
- Low Battery Alarm: 10.5Vdc/11.0Vdc
- Low Battery Trip: 10.0Vdc/10.5Vdc
- High Voltage Alarm: 16.0Vdc
- Low Battery Voltage Restart: 15.5Vdc
- Low Battery Voltage Recover: 13.0Vdc
- Idle Consumption:8 watt
• Output voltage: Depends on battery type selector setting
• Charger Rate: 115Amp
• Over Charge Protection Shutdown: 15.7V
• Input voltage range:180-260Vac(only works with 240Vac nominal input)
• Adjustable charge current: off-20%-100%
• Four Stage Smart Charger
•Unit Weight: 70.4lbs/32KG
•Unit Size L x W x H: 23.5*8.5*7″ inches/598*222*180mm
•Shipping Weight: 74.8 lbs/34KG
•Shipping L x W x H:30.4 x 12.8 x 12.4 inches/760*320*310mm
|Controller Properties||MPPT (maximum power point tracking)|
|System voltage||Automatic recognition|
|Heat-dissipating method||Natural cooling(Without fans).|
|12V system battery identification voltage range||9VDC~15VDC(Lead acid)|
|24V system battery identification voltage range||18VDC~30VDC(Lead acid)|
|Li-ion battery identification voltage range||8VDC~30VDC(Default), ≤ 30VDC(Optional activation function)|
|Max.PV input voltage(VOC)||100VDC(default)|
|Min.Vmpp Voltage||Battery voltage + 2V|
|Start the charge voltage point||Battery voltage + 3V|
|Low input voltage protection point||Battery voltage + 2V|
|PV Over voltage protection point||DC100V|
|PV Over voltage recovery point||DC95V|
|Selectable Battery Types||Sealed lead acid, Gel battery, Flooded. Li-ion|
|Temperature Compensation||-3mV/℃/2V (default)|
|Charge Method||3-Stage: constant current(fast charging)-constant voltage-floating charge|
|Output Voltage Stability Precision||≤ ±0.2V|
|DC output Load voltage||The same as the battery voltage|
|Load control mode||On\Off mode, PV voltage control mode, Dual-time control mode, PV + Time control mode|
|Low voltage protection||The default protection point is 10.5V, and it is restored to 11V (can be set)|
|Setup mode||PC software /APP/ controller display|
|Display mode||High-definition LCD segment code backlight display|
|Communication mode||8-pin RJ45 port/RS485/support PC software monitoring/ support WiFi module to realize APP cloud monitoring|
|Protect function||Input-output over \ under voltage protection, Prevention of connection reverse protection,battery shedding protection etc.|
|Max. connection size||28mm 2|