The 10000 watt inverter with 24 volt to 120/240Volt split phase output was a unique model.
For a 10,000 watt inverter with 24Vdc input, it is easy to be achieved on the high frequency platform, but a challenge when it comes to low frequency.
As the DC input current goes to as high as 600 Amps, only the most efficient and robust power modules will handle that.
This power package includes 10000 watt pure sine dc to ac power inverter, 150 amp 24Vdc battery charger and 83A transfer switch.
Our 24 volt DC input is much safer when it comes to electrical safety, and the 24 volt simplifies battery bank configuration and complies with a wider range of solar chargers when the inverter is integrated into solar systems.
This 10000 watt inverter charger takes a 240Vac input from grid power or generators (two hot lines of 120Vac each in split phase area or 240Vac single phase) and outputs 120Vac/240Vac at 50 or 60Hz . The output voltage can also be calibrated to 220Vac or 230Vac in factory, so the inverter is actually operable in the majority electrical systems in the world.
This 10000 watt inverter is great for emergency backup power, renewable energy, hunting cabin or off-grid vacation home as it gives you access to 10000 watts of continuous power and 30,000 watts of surge power (to 20 seconds) when a power outage occurs.
This top-of-the-line high power inverter with built with latest DC-to-AC inverter technology, it performs with very high Dc to AC efficiency of 90%, 150 watt idle consumption, sharply lower than that of competing models.
Under full linear load, there is a max 10% THD at nominal battery voltage(24Vdc) and max 20% THD at low battery voltage cut off point(20Vdc).
Its AC terminal block is designed to be hard wired to AC outlets for power tools etc.
It’s also built to work in harsh conditions with fluctuating voltage, heat and temperature. And it’s protected from humidity or dust and dirt thanks to its marine-coated or “conformal-coated” boards. This inverter provides the reliability for business or residential emergency backup power systems.
If you are looking for a smaller 24V unit, please check out our 6KW 24V to 120/240V inverter.