Sigineer Power provides off grid solar inverter chargers ranging from 600 watt to 12,000 watts.
These standalone solar energy inverters are built with high efficiency MPPT solar charger controllers with battery bank voltages available at 12 volt, 24 volt and 48 volt.
They works well with solar panels in PV systems.
The most sought after features of these solar energy inverters areOff Grid Solar Inverter Chargers Solar Energy Inverters System Wiring Diagram
1 Battery priority mode and AC priority mode switch.
2 Auto Generator Start
3 Battery voltage recovery start
In AC priority mode, the solar energy inverter works as a UPS.
When input AC power is gone, the load is automatically transferred to the inverter output within 10 mili seconds.
When the qualified AC is restored, the load is automatically transferred back to AC.
The battery priority mode will force the off grid solar inverter chargers to work in invert mode without take power from AC input when the battery voltage is above alarm level.
This will enable users to consume power directly from off grid renewable energy systems, then from batteries.
This way, a minimal amount of battery cycle is required.

In case you are running out of battery power and have no utility power available, our auto generator start will get you covered.
The auto generator start will start an electrical generator and transfer the solar energy inverter to generator when the battery voltage goes low.

After low battery voltage shut off(10V for 12V model or 20V for 24V model or 40V for 48V model), the off grid solar inverter chargers is able to restore to work after the battery voltage recovers to 13V/26V/52V(with power switch still in “On” position).
This function helps to save the users extra labor to reactivate the off grid solar inverter when the low battery voltage returns to acceptable range in renewable energy systems.

Showing all 4 results

Back to Top

Contact Us