Sigineer Power split phase inverter schematics in both AC mode and Battery mode
Sigineer Power split phase inverter schematics in both AC mode and Battery mode
In AC mode, HOT1 Output Protect Breaker protects loads on hot1 from overload and protects the battery from overcharging. In AC mode and battery mode, HOT2 Output Protect Breaker protects loads on hot2 from overload. CT detects battery charging current in AC mode and detects load wattage in battery mode.
The output neutral of the inverter is generated from the transformer middle tap, it is not bonded to ground in any type of operation.
split phase inverter schematic Circuitry scheme for AC Mode
Contact us now to find out the best 120 240 inverter for you.
I need your help.
Can you send me an Electrical Schematic and Wiring of the 6Kw 120/240 Split Phase inverter?
Also, I want to know if I can connect the input and output of your inverter, to the same main distribution panel at the same time?
Do I need a transfer switch in between?
thank you for helping with this.